Re-wind tool.

Hey folk i have just spotted this on e-bay, I know i shall need new rear brake discs this year & will need a rewind tool for the Callipers, I have thought this looks to small/frail to do the job si if someone could enlighten me, i'd appreciate it. whats your thoughts on this one??

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230340441631&ssPageName=ADME:B:WNARL:GB:1123

Do you have the actual winding tool Mitch?

Looks like what I have for the Golf. Did the job just fine

envoy cdx wrote:Do you have the actual winding tool Mitch?

Looks like what I have for the Golf. Did the job just fine

No i don't thats what i thought was in the link?? I shall have to buy one so was thinking if this would be adequate??

mitch1965 wrote:

envoy cdx wrote:Do you have the actual winding tool Mitch?

Looks like what I have for the Golf. Did the job just fine

No i don't thats what i thought was in the link?? I shall have to buy one so was thinking if this would be adequate??

Thats only the adaptor plate Mitch, you'll need the other bit too




http://cgi.ebay.co.uk/LASER-BRAKE-CALIPER-RE-WIND-TOOL_W0QQitemZ310107622074QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item310107622074&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

Just make sure the 2 bits are compatible

envoy cdx wrote:

mitch1965 wrote:

envoy cdx wrote:Do you have the actual winding tool Mitch?

Looks like what I have for the Golf. Did the job just fine

No i don't thats what i thought was in the link?? I shall have to buy one so was thinking if this would be adequate??

Thats only the adaptor plate Mitch, you'll need the other bit too




http://cgi.ebay.co.uk/LASER-BRAKE-CALIPER-RE-WIND-TOOL_W0QQitemZ310107622074QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item310107622074&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

Just make sure the 2 bits are compatible

Ta for the link gary, i would have thought this one should do the job without the other bit??

mitch1965 wrote:

envoy cdx wrote:

mitch1965 wrote:

envoy cdx wrote:Do you have the actual winding tool Mitch?

Looks like what I have for the Golf. Did the job just fine

No i don't thats what i thought was in the link?? I shall have to buy one so was thinking if this would be adequate??

Thats only the adaptor plate Mitch, you'll need the other bit too




http://cgi.ebay.co.uk/LASER-BRAKE-CALIPER-RE-WIND-TOOL_W0QQitemZ310107622074QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item310107622074&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

Just make sure the 2 bits are compatible

Ta for the link gary, i would have thought this one should do the job without the other bit??

Not sure, as far as I'm aware the adaptors differ in size for different calliper pistons.